From a reservoir 1,200 m away, a 15 cm diameter main pipe supplies water to six multistory buildi… 1 answer below »

From a reservoir 1,200 m away, a 15 cm diameter main pipe supplies water to six multistory buildings in an industrial park. The reservoir is 80 m above the datum elevation. The positions of the buildings are shown in the Figure below. The height and the water demand of each building are as follows Buildings Height (m) 9.4 7.0 8.1 6.0 3.2 3.0 6.0 7.8 9.6 8.5 4.5 10.0 Water demand (L/sec) If commercial steel pipes are used for the network (downstream from the junction J), A gate valve (K = 0.15 when fully opened) is installed in the main pipe immediately upstream from the junctionJ Using appropriate software a) Determine the correct size of each pipeline b) If no reservoir was to be used and instead a pump will be used. What are the characteristics of the best pump to be used? c) f the water demand varies with time at each building according to the Table below how would your design be different? Buildings Height (m Water demand 9.4 3.2 6.0 9.6 4.5 Residential Residential Residential Residential Commercial Mosque Buildin Buildin Buildin Buildin Buildin 130 m ate valve 7om 50 m 120 m Main pie s0 m 00 m 130 7O m

can you please solve this using EPANET software.

Save your time - order a paper!

Get your paper written from scratch within the tight deadline. Our service is a reliable solution to all your troubles. Place an order on any task and we will take care of it. You won’t have to worry about the quality and deadlines

Order Paper Now

From a reservoir 1,200 m away, a 15 cm diameter main pipe supplies water to six multistory buildings in an industrial park. The reservoir is 80 m above the datum elevation. The positions of the buildings are shown in the Figure below. The height and the water demand of each building are as follows Buildings Height (m) 9.4 7.0 8.1 6.0 3.2 3.0 6.0 7.8 9.6 8.5 4.5 10.0 Water demand (L/sec) If commercial steel pipes are used for the network (downstream from the junction J), A gate valve (K = 0.15 when fully opened) is installed in the main pipe immediately upstream from the junctionJ Using appropriate software a) Determine the correct size of each pipeline b) If no reservoir was to be used and instead a pump will be used. What are the characteristics of the best pump to be used? c) f the water demand varies with time at each building according to the Table below how would your design be different? Buildings Height (m Water demand 9.4 3.2 6.0 9.6 4.5 Residential Residential Residential Residential Commercial Mosque Buildin Buildin Buildin Buildin Buildin 130 m ate valve 7om 50 m 120 m Main pie s0 m 00 m 130 7O m

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *